Chevette Works Historic Specification Atlas Axle by TJ Motorsport

NOTE: Click on PDF image below to download axle drawing:

Install required measurements and email to sales@tjmotorsport.co.uk. We will need this prior to building your axle.

Chevette Works Historic Specification Atlas Axle (Late Spec Dealer Team Vauxhall - Damper On Top Of Axle Tube):

• Gripper Plate Limited Slip Differential Fitted.
• 18 Tooth Group 4 Side Gears.
• 4.6 Or 5.1 CWP Ratio Fitted.
• Maximum Width 56 7/8" (1445mm) Hub Face To Hub Face.
• Fully Floating Hub Kits Fitted.
• Heavy Duty Group 4 Fully Floating Shafts And Flanges Fitted.
• Group 4 Studs And Nuts.
• Thick Tubed, Double Pinned, Breather Connection Fitted.
• Lower Link Brackets Welded At 940mm Centre Line (470mm From Centre Of Axle).
• Upper Link Brackets Welded At 656mm Centre Line (328mm From Centre Of Axle).
• Damper Brackets Fitted On Top Of Axle.
• Panhard Rod Bracket Fitted.
• Brake Caliper Brackets Fitted To Suit AP Racing CP2577 Calipers.
• AP Racing CP2577 Calipers With Handbrake Attachment Fitted.
• Solid Discs Fitted.
• Back Cover, Gasket, Spreader Plates Fitted.
• Powdercoated Black.
• Fully Assembled For Road Or Motorsport Use.

NOTE: Axle Will Be Supplied Empty Of Oil.

SPECIAL ORDER: Made To Order In Approximately 4-6 Weeks.